COATING TECHNICAL FILE

-
 COATING TECHNICAL FILE


The Coating Technical File (CTF) is a document, either in paper or electronic format, or a combination of the two, required formed by the IMO Resolution MSC.215(82) “Performance Standard for Protective Coatings of dedicated sea water ballast tanks and double-side skin spaces
of bulk carriers”, also known as the IMO PSPC.

The “initial” Coating Technical File (CTF) is to contain documents providing:

aa)an inspection agreement between the owner, the yard and the coating manufacturer, including
documentation of certified or qualified coating inspectors 

bb)the paint work specification.

cc)procedures for inspection and repair of coating system during vessel construction.

dd)procedures for in-service maintenance and repair of the coating system

ee)type approval certificates for the coating systems

ff)manufacturer’s technical data sheets (shop primer and main coating system) and MSDS of the paint

The “final” Coating Technical File (CTF) is to contain:
aa)the “initial” Coating Technical File (CTF), as described above

bb)final inspection and repair reporting, including daily logs, non-conformity reports, dry film thickness reports and final inspection reports.

Comments

  1. RF Plumbing & Heating27 June 2022 at 18:50

    Nice blog!
    At RF Plumbing and Heating, our professional engineers have broad knowledge in all aspects of boiler appliances, allowing us to offer a full range of Boiler Service Glasgow area to the properties.

    ReplyDelete

Post a Comment

Popular posts from this blog

MULTIPLE LOAD LINE- PROCEDURE AND CAUTION.

-
Image
Multiple Load Line – a Thorough View. Whether a vessel can carry multiple load line ?? A very genuine innocent question , what is the problem , but please answer to the question very carefully. We have vessel’s having at least 8 loadlines ,  Yes a ship can multiple load line, BUT at    any point of time there will be only one load line will be valid and rest of the LOAD LINE certificates to be under safe custody of master preferably in his locker , at any point of time no two Load line certificate should be along with the certificate bunch. What is multiple load line. Multiple load lines  are used when, for a period of time, a  ship  has a need to operate temporarily with a greater freeboard than the minimum freeboard stipulated in accordance with the International Convention on  Load Lines   of 1966. Purpose of multiple loadline. “Load line is a special marking positioned amidships which depicts the draft of the vessel and the maximum permitt
Read more

MASTER'S REVIEW ON SMS

-
MASTER'S REVIEW ON SMS The ISM Code requires the Company to define and document the Master's responsibility with regard to 'reviewing the Safety Management System and reporting its deficiencies to the shore based management'.  The opportunity provided by the Master's formal review should not be underestimated, allowing the Master and those on board ship to increase their sense of ownership of the SMS. Suggestions from the Master about potential improvements to the SMS should be taken seriously by the Company. In some Companies it is common practice to schedule a Master's review of the SMS on each ship once every 12 months, (Like in Anglo the review to be completed by every December and if master is due for sign off in Nov / Dec then the same has to complete by October end) and the interval should not be greater than this.  However, in Companies where the full potential of the Master's review has been recognised, this exercise is carried out
Read more